<![CDATA[Horror Costume Index

<![CDATA[Horror Costume Index - Blog]]>Sun, 30 Mar 2025 17:29:02 -0700Weebly<![CDATA[The Tale of 2 Pamela Voorhees Sweaters- Friday the 13th (1980)]]>Wed, 08 Mar 2023 03:03:23 GMThttps://www.horrorcostumeindex.com/blog/the-tale-of-2-pamela-voorhees-sweaters-friday-the-13th-1980I wish that I could take credit for this observation, but all kudos here go to u/camper of the Friday the 13th subreddit, a.k.a littlegrotesquerie of the Friday the 13th Fanatics forum. The user started a project in which she actually knitted her very own Pamela Voorhees Sweater.

Hand-knitted sweater by littlegroteserie

As you can see above, littlegrotesquerie did a phenomenal job at knitting this sweater. They were able to do this by freeze-framing the film and counting the individual stitches, determining yarn thickness, and the sweater's construction. While doing this the user also noticed that Betsy Palmer wears two different versions of the iconic sweater! I am not surprised that it took as long as it did for this to go noticed, as the differences are very slight. It appears that the sweaters are the same brand and that the differences likely come from a change in pattern due to sizing, as sweater with additional details fits Betsy a bit larger.

Difference 1: From center outward, the "primary" sweater has a tight 4 stitch-wide band, followed by a cable on each side, followed by a tight 2 stitch-wide band, then the "diamond" stitched pattern, another tight 2 stitch-wide band, and lastly a cable that runs from the waist band before transitioning into a plain band around the armpit area. On the "secondary" sweater the 2 stitch-wide band that lies third to center has a large space in between.

1st difference between the primary and secondary sweater

Difference 2: After the diamond pattern, the "primary" sweater has a tight 2 stitch wide band running from the waistband to the shoulder seam, followed by a cable running from the waistband until right around the armpit, where it transitions into a plain band that runs to the shoulder seam. On the "secondary" sweater, this cable stays one rather than transitioning to a plain band.

2nd difference between the primary and secondary sweater

As of now, these appear to be the only differences between the two sweaters. Both are complete plain on the back and have a single cable running down the arm. When it comes to determining which is the "primary vs "secondary" sweater I reviewed the film from Betsy's first appearance on screen to the very last scene of Savini wearing the severed head rig and grasping at the air. The "primary" sweater was labeled as such because it appears in some of the most pivotal scenes including the motive rant and the beheading. The sweaters alternate almost every other scene, as follows:
1. Pam's first appearance up to the motive rant- Secondary Sweater
2. Motive rant to the end of the first fight with Alice- Primary Sweater
3. From Pam finding Alice, through the second fight, to Pam breaking through the door- Secondary Sweater
4. Pam walking through door to Alice rolling her over on the floor- Primary Sweater
5. Beach attack and fight- Secondary Sweater
6. Savini FX Beheading scene- Primary Sweater

]]><![CDATA[New Footage of Ted White Jason Appliances]]>Wed, 01 Mar 2023 22:37:45 GMThttps://www.horrorcostumeindex.com/blog/white-jason-appliancesWow, what a treat this is! Have you ever thought “I wish I was a fly on the wall” for a moment? This is your chance to feel like that fly! I can’t believe this footage has been out since 2015 and I haven’t seen or heard it discussed until recently. A good friend of mine suggested that I purchase Tom Savini’s “Smoke and Mirrors” Blu-Ray as it contained an extended look at Kevin Yagher and other FX team members applying test appliances for Jason’s unmasking scene to Ted White, as well as some additional “machete dummy” footage, both of which have been partially seen via various still frames being shared around the internet for years.

Photos of the Test Application

Seeing as The Final Chapter is my favorite Jason design by far, I immediately ordered the Blu-Ray, but nothing could have prepared me for the absolute joy that I felt while watching this video. Seeing the makeup on Ted in various ranges of motion, fully lit, and from multiple angles is a dream come true. It almost evokes an uneasy feeling, seeing this moment in such a candid way, almost as though it was something never meant to be seen or experienced by those not in the room at the time. I took the liberty of uploading the footage here in hopes that anyone seeing this enjoys it even a fraction of the amount I did.

P.S.- This is just a small portion of the overall footage included on the DVD/Blu-Ray and I highly recommend picking it up when you can! It’s low cost, trove of Behind the Scenes footage, and other awesome information about Savini’s story make it a must have for any horror fan.

]]><![CDATA[New photos of the "Mystery Mask", As displayed in The Hollywood Museum]]>Thu, 24 Mar 2022 07:00:00 GMThttps://www.horrorcostumeindex.com/blog/new-photos-of-the-mystery-mask-as-displayed-in-the-hollywood-museumFor those that aren't familiar, the "mystery mask" is an oddball hockey mask from the Friday the 13th franchise that is surrounded by, you guessed it, mystery. Jason Farrell of the "JasonLivesSince1980" blogspot has a blog entry that explains the full history of this mask in great detail and I encourage you to check it out here. Recently Jason posted a blog entry about his opportunity to see the mystery mask in person, posted photos of the mask, as well as a list of observations of the piece. Inspired by this, I decided to get some professional photos and share some of them with you all. The quality is pretty insane, so I have no doubts that you will all love seeing the close up details. Enjoy!

]]><![CDATA[In Depth Friday the 13th Hockey Mask Timeline]]>Tue, 07 Jul 2020 12:37:35 GMThttps://www.horrorcostumeindex.com/blog/in-depth-friday-the-13th-hockey-mask-timelineInspired by Jason Farrell's condensed Friday the 13th hockey mask timeline, I decided to make a full version. This timeline includes a lineage chart for the origins of the hocks from installment 3-9 as well as descriptions at the top of the column. I tried my best to include every mask pulled from the mold for each film but there are definitely many more in private collector hands out there.

]]><![CDATA[Screen used Halloween 1978 Mask Timeline]]>Tue, 07 Jul 2020 11:33:56 GMThttps://www.horrorcostumeindex.com/blog/screen-used-halloween-1978-mask-timelineEver wonder where the original HalloweeN (1978) masks went off too, or how they appeared throughout the years? A lot of people know but no one had previously made a timeline of the three masks and their publicly known appearances throughout the years, so I decided to make a summary and upload it here! Enjoy.

]]><![CDATA[1975 DPS Captain Kirk Mask Lineage Charts]]>Sat, 04 Jul 2020 13:39:38 GMThttps://www.horrorcostumeindex.com/blog/1975-dps-captain-kirk-mask-lineage-chartsIn the "HalloweeN" fan circles some of the best independent Halloween 1 and 2 masks have come from recasts of Don Post Studios Captain Kirk masks, the same type of mask used in the first 2 installments. The vast sea of Myers mask replicas it can make it difficult to tell some of their origins, so with that burden in mind I took it upon myself to create lineage charts for every 1975 Kirk mask that has been recast to produce replica Michael Myers masks as well as each offspring.

First off we have the "Kirkus Kirk", arguably the most well known of the replica-producing original Kirk masks given how many offspring it has. This mask used to be owned by Billy Kirkus, then it ended up in the hands of Bry Hoffman who restored it to Kirk form and sold it on eBay years ago.

Next is the "Medley Kirk". This Kirk produced one of the most infamous masks in the hobby, the HMK. From that initial molding of the Kirk, several other iterations were created and passed along. This mask used to be owned by John Medley who then sold it to a private collector.

Next in line is another very popular line of masks that descend from the "98 Proto Kirk". Although it is not a standard production run 1975 Don Post Studios Kirk mask, it is from the same mold! This mask popped up several years ago when a forum member found it in a shop and bought it out of curiosity. It turned out to be one of several prototype copies of the 1998 Don Post Studios Kirk mask. The forum member sold it to Nikos Dresios of "NAG" and it has been used as the base for a great majority of NAG masks.

The "Jay Allen Kirk" produced this next lineup of masks but sadly his original Kirk is no longer in existence. Jay Allen bought a nice original Kirk mask and sent it to Terry Lambert of CGP to have it foam filled. What he received back was a poorly done recast of what was NOT his original mask. Terry had stolen the original kirk and destroyed it in an attempt to recast it. Years later NAG managed to put the copy to use and make 2 replicas shown below.

The last of the original Kirk masks that have created replicas is the "Sean Clark Kirk". This used to be owned by collector Sean Clark and he used it to create some of the earliest accurate Myers masks replicas that we know of. It has been rumored that rather than using an actual Kirk mask, the foam backing that came with some copies was used instead. This would help to make sense of the masks initially under-detailed nature but with keeping the form correct.

]]><![CDATA[How Did The Halloween 4 Masks Get to Set?]]>Thu, 18 Jun 2020 12:28:00 GMThttps://www.horrorcostumeindex.com/blog/how-did-the-halloween-4-masks-get-to-setHow many masks were on set? Where did they come from? At what point do those masks show up in the film?
Those are questions all H4 fans have asked themselves at one point and those are what we'll attempt to answer today!

Running theories on how the masks got to set:

1. Backup Mask from H2 was on set (School House Mask), Ken Horn made 6 copies recast from it.
"Don Post of Don Post Studios has stated numerous times that the studio did not make any masks for Halloween 4. Period, end of story. Also, I might add, by 1988...the Kirk master and mold were LONG gone."- Billy Kirkus

Most use the following Gorezone magazine quote taken on the set of H4 as evidence supporting Ken making the masks, not DPS:
"We did not have time to go into the lab and make one...Fortunately, the company had one of the masks from Halloween II. I was able to make some adjustments on it and a handful of rubber backups to fit the actor playing Michael."- Ken Horn

Why would Ken state that he didn’t have time to make extras, then immediately after state that he made 6 extras? In my opinion, he wouldn’t, which leads me to believe that the next theory is the truth and that Ken did NOT create the masks by recasting the on set back-up H2.

2. Backup Mask from H2 was on set (School House/Kelly Meeker Mask), Don Post Studios sent 6 extras to set.

This theory is another popular one, and personally, this is how I believe the masks got to set.
A testimony given by Ken later on in several interviews is that Don Post Studios sent him a box of 6 masks that were all painted “pink with white hair”, and he then modified them (and the backup H2) to be white with brown hair.

Ken Horn stated: "I asked Don Post when they redid it for us to use the Shatner mold and actually use William Shatner cause we wanted the actual true face. I didn't get a chance to see those masks until we actually got on set. I opened the box and there were 6 of them, and they were pink with white hair. I was going, this is not right, they're supposed to be white with brown hair, and I told the producer that it should be changed."

However, when asked about this Don Post denied it:
"Don Post of Don Post Studios has stated numerous times that the studio did not make any masks for Halloween 4."- Billy Kirkus

When looking at all the evidence combined, it becomes clear to me that the H4 masks were made outside of set either in pre-production or early filming stages.

]]><![CDATA[Halloween 1/2 Stunt Mask Identification]]>Thu, 18 Jun 2020 03:27:22 GMThttps://www.horrorcostumeindex.com/blog/halloween-12-stunt-mask-identificationFor my first real post of the blog I've decided to write about a discovery I made a while ago that we actually have crystal clear photos of all three masks made for Halloween (1978), which contradicts a long standing misconception in the Halloween fan community. Here is a photo of all three masks at the '78 wrap party, although a bit grainy we can at least make out some details!

Photo Credit: Kim Gottlieb Walker

The three masks that we know were made for Halloween are the Hero, Stunt mask A (schoolyard and hallway reveal mask), and Stunt mask B (unused in H1, used as Stunt Blood Tears in H2). The hero (right) is very distinct and with it being the most recognizable of the three it can easily be identified- the other two are where the misconceptions were held. Below is a photo of what we now know are two separate masks, Stunt A and Stunt B. For a long time, these were misidentified as the same mask.

Stunt mask A (left) and stunt mask B (right). Photo Credit: Kim Gottlieb Walker, Marie Donaldson

If you really study the masks, you can clearly tell that they are different. The easiest place to tell these masks apart are in the eye cuts. Not only are they entirely different shapes, but there are small differences as well. We'll first look at the proper left eye cut. Stunt mask A seems to have a much more jagged cut, whereas the Stunt B/Stunt Blood Tears mask is very clean cut. In the B&W hallway shot if you look at the top inner corner of the eye cut, you notice a jagged notch that is not present on the Stunt B mask. It is circled in red below.

Stunt mask A (left) and stunt mask B (right). Photo Credit: Kim Gottlieb Walker, Marie Donaldson

The most common defense of this is that "it's probably just stretched over to the side, altering the shape", but the photo from H1 shows the wearer giving it the "castle stretch" NOT stretching it sideways like Warlock. If they were the same mask then the wearer in the H1 behind the scenes photo would make the eye cut appear longer than the photo to the right, which they are not.

Onto the differences in the proper left eye cut. They already look very different but the top inner corner gives it away again. On Stunt mask A you can see it goes high in the corner and dips in the middle of the eye cut.

Stunt mask A (left and right) and stunt mask B (middle). Photo Credit: Kim Gottlieb Walker, Marie Donaldson

So to summarize:
Hallway mask=H1 Face Reveal Mask=Left Wrap Party mask=SNL mask
We will start with matching the Hallway mask to the Face Reveal mask. The similarities between the two are found in the eye cuts and distinct markings on the proper left cheek:

Comparison between the BTS Hallway shot and the H1 reveal scene. Photo Credit: Kim Gottlieb Walker

And now to match this mask to the left wrap party/SNL mask! If we compare these two with various photos we can clearly match them. Check out the photo below and see for yourself!

Comparison between the BTS Hallway shot and the Jamie Lee Curtis SNL Photoshoot. Photo Credit: Kim Gottlieb Walker, Jamie Lee Curtis.

Knowing these masks are the same goes even further to prove that it is not the Stunt Blood Tears mask because if we compare the sideburn glue lines leftover from the Kirk conversion, we can see they are placed differently in distance from the eye cut and ear. This is a feature that would not change on a mask.

Stunt Blood Tears (left) and Hallway reveal mask (right) differences. Photo Credit: Trancas International, Kim Gottlieb Walker

]]><![CDATA[Welcome!]]>Thu, 18 Jun 2020 00:46:34 GMThttps://www.horrorcostumeindex.com/blog/welcomeHello! Welcome to The Horror Costume Index Blog and to the new website in general! My name is Nathan and I will be running the site and updating this blog as new information becomes available. Soon there will be a gallery including photo archives of screen used masks and props, replicas, and behind the scenes photos. In addition to that a forum will be coming as well! Stay tuned for more updates.]]>